Controllers per pompe antincendio elettriche secondo EN 12845 e UNE 23500
SCF830-E-U Star-delta Starting Fire Pump Controllers monitora, visualizza e registra le informazioni sui sistemi Fire Pumps. Sono progettati per soddisfare e superare i requisiti delle norme EN 12845 e UNE 23500.
I Controllers SCF830-E-U sono strumenti ad alte specifiche e applicano la tecnologia più avanzata nel processo di avvio e arresto delle pompe antincendio elettriche. Proteggono le Pompe Antincendio attraverso l’azione degli allarmi sia connessi che generati dai controllori stessi; gestiscono la comunicazione con l’operatore e sia con gli elementi di contorno che con il centro remoto presidiato.
| Nº | STANDARDS & TECHNICAL RULES | |
|---|---|---|
| 1 | Standard EN 12845 Ed.2015 +A1:Ed. 2019 | |
| 2 | Standard UNE 23500 Ed.2018 & Ed.2012 | |
| 3 | Standard UNI 10779 Ed. 2014 | |
| 4 | Standard IEC 61439-1 Ed. 2011 Low-voltage switchgear and controlgear assemblies | |
| 5 | Tech. Rule CEPREVEN R.T.1-ROC Ed.2004 | |
| 6 | Tech. Rule CEPREVEN R.T.2-ABA Ed.2006 | |
| Nº | RANGE OF PRODUCTS (according to the type plate) | ||
|---|---|---|---|
| 1 | Incoming line voltage | 600 V AC / 400 V AC / 230 V AC | |
| 2 | Mains frequency | 50 Hz / 60 Hz. | |
| 3 | Main pump motor size | Up to 400 kW (ask for other powers) | |
| 4 | Jockey pump motor size | Up to 30 kW | |
| 5 | Motor starter type | DOL / λ-Δ according to the motor power / Soft starters | |
| Nº | CONSTRUCTIVE FEATURES | ||
|---|---|---|---|
| 1 | External enclosure | IP65 Protected from total dust ingress (NEMA 4) | |
| 2 | Impact rating: IK10 (except for display) | ||
| 3 | Fireproof grade: Fire extinguishes <30s | ||
| 4 | Display | Transflective: Visible under direct sunlight | |
| 5 | Wiring | Halogen free | |
| 6 | Fireproof: RZ1 according to EN50200 (830ºC for 90min) | ||
| 7 | Pump room temperature | 20 ºF to 122ºF (-5ºC to 55ºC) | |
| 8 | Isolation rating between phases | 500 Vac | |
| 9 | Isolation rating between phases and ground | 2.500 Vac | |
| 10 | Isolation impedance between phases and ground | 2 MΩ | |
| 11 | Earthing system | TT system (neutral and earht connected separatelly ) | |
| 12 | Electromagnetic environment | CEM-1 | |
| Nº | MEASURING INSTRUMENTS IN THE DISPLAY | ||
|---|---|---|---|
| 1 | System | 3 Voltmeter: voltage for every phase R-S-T (RMS) | |
| 2 | 1 Mains frequency meter | ||
| 3 | 1 pump rotation/phase rotation | ||
| 4 | 1 Manometer pump discharge pressure ( pressure sensor required with 4-20 mA signal) | ||
| 5 | Main pump | 1 Ammeter: pump current (RMS) | |
| 6 | 1 active power in KW (RMS) | ||
| 7 | 1 Power factor (Cos φ) | ||
| 8 | 1 Flowmeter: (flow sender required with 4-20 mA signal) | ||
| 9 | Jockey pump | 1 Ammeter: pump current (RMS) | |
| 10 | 1 Active power in KW (RMS) | ||
| 11 | 1 Power factor (Cos φ) | ||
| 12 | Controller | 1 Voltmeter: Internal voltage | |
| 13 | Controller | 1 Voltmeter: back-up battery voltaje | |
| Nº | PUMS & SYSTEM PROTECTION |
|---|---|
| 1 | Voltage loss |
| 2 | Normal power phase reversal |
| 3 | Normal frequency loss |
| 4 | Main pump protection trip |
| 5 | Overload main pump |
| 6 | Fail to start main pump |
| 7 | Jockey pump protection trip |
| 8 | Controller power loss |
| 9 | Low water reservoir tank |
| 10 | Low priming tank level |
| 11 | Battery charger failure |
| 12 | No internal battery detected |
| 13 | Low back-up battery voltage |
| 14 | Main pump pressure switch short circuit |
| 15 | Main pump pressure switch open circuit |
| 16 | Low power factor main pump |
| 17 | Low power factor jockey pump |
| 18 | Under-current main pump |
| 19 | Under-current Jockey pump |
| 20 | Overload Jockey pump |
| 21 | Pressure sensor fault |
| 22 | Driver fault main pump |
| 23 | Driver fault Jockey pump |
| Nº | COMMUNICATIONS & SIGNAL TRANSMISSION | ||
|---|---|---|---|
| 1 | micro USB Port | Boot loader for firmware upgrading | |
| 2 | SAF (control panel PLC ) configuration | ||
| 3 | PC monitoring: Pump and installation general condition | ||
| 4 | Pendrive data down-load: Events log / Pressures register log / Pump tests log | ||
| 5 | ETHERNET | SAF (control panel PLC ) configuration | |
| 6 | PC monitoring: Pump and installation general condition | ||
| 7 | RS485 | SAF (control panel PLC ) configuration | |
| 8 | PC monitoring: Pump and installation general condition | ||
| 9 | Voltage free contacts : up to 30 V DC / 0,3 A |
Voltage loss | |
| 10 | Main pump automatic mode OFF | ||
| 11 | Fail to start / not discharge pressure | ||
| 12 | Grouped alarmas | ||
| 13 | Pump on demand | ||
| 14 | Pump running with pressure | ||
| Nº | LANGUAGES & OTHER FEATURES | |
|---|---|---|
| 1 | ENGLISH / ESPAÑOL / ITALIANO / FRANÇAIS / PORTUGUES | |
| 2 | Monitored pressure switch lines: Short circuit / open circuit alarm | |
| 3 | Pump demand by pressure transducer analog reading of system pressure | |
| 4 | Jockey pump start count & working hours and minutes | |
| 5 | Main pump working hours and minutes | |
| 6 | 500 last events log (starts, alarms, …) | |
| 7 | 16,000 latest records of system pressure variation | |
| 8 | 50 pressure / Flow pump test récords | |
| 9 | Current date and time (RTC with independent battery) | |
| 10 | Calibration of analog measurements: Pressure / Voltage / Amps … | |
| 11 | Digital and analog inputs and outputs checking of on the display | |
| 12 | 80 dB buzzer | |
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
SCF8M-E-U Quadro motori elettrici (<200Kw) + jockey (<5,5Kw)
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Motori Diesel Antincendio
Quadri Antincendio
Generatori Diesel
