Pompe antincendio elettriche Star Delta Controllers EN 12845, LPC TB210, UNI 10779
SCF8M-E-U Star-delta Starting Fire Pump Controllers monitora, visualizza e registra le informazioni sui sistemi Fire Pumps. Sono progettati per soddisfare e superare i requisiti delle norme EN 12845 e LPC TB210.
I controller SCF830M-E-U sono strumenti ad alta specifica e applicano la tecnologia più avanzata nel processo di avvio e arresto delle pompe antincendio elettriche. Proteggono le Pompe Antincendio attraverso l’azione degli allarmi sia connessi che generati dai controllori stessi; gestiscono la comunicazione con l’operatore e sia con gli elementi di contorno che con il centro remoto presidiato.
| Nº | STANDARDS & TECHNICAL RULES | |
|---|---|---|
| 1 | Standard EN 12845 Ed.2016 | |
| 2 | Standard UNE 23500 Ed.2018 | |
| 3 | Standard UNI 10779 Ed. 2014 | |
| 4 | Standard IEC 61439-1 Ed. 2011 Low-voltage switchgear and controlgear assemblies | |
| 5 | Tech. Rule CEPREVEN R.T.1-ROC Ed.2004 | |
| 6 | Tech. Rule CEPREVEN R.T.2-ABA Ed.2006 | |
| Nº | RANGE OF MODELS (according to type plate) | ||
|---|---|---|---|
| 1 | Incoming line voltage | 400 V AC / 230 V AC | |
| 2 | Mains frequency | 50Hz / 60 Hz. | |
| 3 | Main pump motor size | Standard up to 200 kW | |
| 4 | Jockey pump motor size | Up to 5,5 kW | |
| 5 | Motor starter type | DOL / λ-Δ according to the motor power | |
| Nº | CONSTRUCTIVE FEATURES | ||
|---|---|---|---|
| 1 | External enclosure | IP65 Protected from total dust ingress (NEMA 4) | |
| 2 | Impact rating: IK10 (except for display) | ||
| 3 | Fireproof grade: Fire extinguishes <30s | ||
| 4 | Display | Transflective: Visible under direct sunlight | |
| 5 | Wiring | Halogen free | |
| 6 | Fireproof: RZ1 according to EN50200 (830ºC for 90min) | ||
| 7 | Pump room temperature | 20 ºF to 122ºF (-5ºC to 55ºC) | |
| 8 | Isolation rating between phases | 500 V AC | |
| 9 | Isolation rating between phases and ground | 2.500 V AC | |
| 10 | Isolation impedance between phases and ground | 2 MΩ | |
| 11 | Earthing system | TT system (neutral and earht connected separatelly ) | |
| 12 | Electromagnetic environment | CEM-1 | |
| Nº | MEASURING INSTRUMENTS IN THE DISPLAY | ||
|---|---|---|---|
| 1 | System | 3 Voltmeter: voltage for every phase L1-L2-L3 (RMS) | |
| 2 | 1 Mains frequency meter | ||
| 3 | 1 pump rotation/phase rotation | ||
| 4 | 1 Manometer pump discharge pressure ( pressure sensor required with 4-20 mA signal) | ||
| 5 | Main pump | 1 Ammeter: pump current (RMS) | |
| 6 | 1 active power in KW (RMS) | ||
| 7 | 1 Power factor (Cos φ) | ||
| 8 | 1 Flowmeter: (flow sender required with 4-20 mA signal) | ||
| 9 | Jockey pump | 1 Ammeter: pump current (RMS) | |
| 10 | 1 Active power in KW (RMS) | ||
| 11 | 1 Power factor (Cos φ) | ||
| 12 | Controller | 1 Voltmeter: Internal voltage | |
| 13 | Controller | 1 Voltmeter: back-up battery voltaje | |
| Nº | PUMS & SYSTEM PROTECTION | |
|---|---|---|
| 1 | Voltage loss | |
| 2 | Normal power phase reversal | |
| 3 | Normal frequency loss | |
| 4 | Main pump protection trip | |
| 5 | Overload main pump | |
| 6 | Fail to start main pump | |
| 7 | Jockey pump protection trip | |
| 8 | Controller power loss | |
| 9 | Low water reservoir tank | |
| 10 | Low priming tank level | |
| 11 | Low back-up battery voltage | |
| 12 | Main pump pressure switch short circuit | |
| 13 | Main pump pressure switch open circuit | |
| 14 | Low power factor main pump | |
| 15 | Low power factor jockey pump | |
| 16 | Under-current main pump | |
| 17 | Under-current Jockey pump | |
| 18 | Overload Jockey pump | |
| 19 | Pressure sensor fault | |
| Nº | COMMUNICATIONS & SIGNAL TRANSMISSION | ||
|---|---|---|---|
| 1 | micro USB Port | Boot loader for firmware upgrading | |
| 2 | SAF8M (control panel PLC ) configuration | ||
| 3 | PC monitoring: Pump and installation general condition | ||
| 4 | Pendrive data down-load: Events historical / Pressures historical | ||
| 5 | ETHERNET (Optional) | SAF8M (control panel PLC ) configuration | |
| 6 | PC monitoring: Pump and installation general condition | ||
| 7 | RS485 port (Optional) | SAF8M (control panel PLC ) configuration | |
| 8 | PC monitoring: Pump and installation general condition | ||
| 9 | Voltage free contacts : up to 30 V DC / 0,3 A |
Voltage loss | |
| 10 | Main pump automatic mode OFF | ||
| 11 | Fail to start / not discharge pressure | ||
| 12 | Grouped alarmas | ||
| 13 | Pump on demand | ||
| 14 | Pump running with pressure | ||
| Nº | LANGUAGES / OTHER FEATURES |
|---|---|
| 1 | ENGLISH / ESPAÑOL / ITALIANO / FRANÇAIS / PORTUGUES /DEUTSCH / NEDERLANDESE |
| 2 | State of pressure switches: Short-circuit / Open circuit monitoring |
| 3 | System pressure meter: Value displayed on digital screen. Selection of demand and stop levels |
| 4 | 3 operatin modes: OFF/ MAN / AUTO: Keylock for AUTOMATIC mode |
| 5 | Events log: Historical of 500 events in memory: Downloadable to pendrive |
| 6 | Pressures register: Historical of 16,000 records in memory: Downloadable to pendrive |
| 7 | Pump test: Historical of 50 records in memory: Downloadable to pendrive |
| 8 | Main pump working hours + Jockey pump start count & hours |
| 9 | Digital & Analog Input / Output test on display |
| 10 | Power elements: Contact breakers in AC-3 / Isolator switches in AC-23 |
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Quadri Antincendio
Motori Diesel Antincendio
Quadri Antincendio
Generatori Diesel
